  Skidsteer Mounted Door Opener
|
This skid mount unit weights right under 400 lbs. We use the standard quick attach mounting system. If yours is different from “standard” we can usually accommodate your situation.
This unit has two pivoting points. The boom itself goes both left and right, then the head also turns left and right. These positions are locked in place with a simple 1” pin. The Demon has a 5 ft reach in all directions so it is past the tires and will clear many obstacles.
Of course the hydraulic hoses hook into your auxiliary line with controls to the driver. The flow controls require 2 gpm (gallons per minute) @ 2950 psi to give maximum torque. This pressure is obtained by most skid steers and is usually no problem but still check with your manual.
The hydraulic motor we use is the Char Lynn 6000 series made by Eaton.
|
